Enhanced drainage protection stations NPP SIE'L T1 D 1800-150-12AP, etc.

Reinforced drainage protection stations with a capacity of up to 3 kW. The stations contain identical modules and differ in the sizes and types of enclosures, which means the ability to remove heat from the modules to the external environment. There are 2 modules installed in the 3 kW station.
In stations where the power is limited by the ability of the housing to remove heat, the maximum output power is set using the technological parameters available to the user. This allows, for example, a 1.2 kW station with a maximum current of 24 A to be rebuilt to a mode of 30 A, 40 V. If the ambient temperature is not high, you can also rebuild the station to the 1.5 kW mode. In any case, the station will protect itself from overheating. All this makes it possible to adapt the power parameters of the station to specific operating conditions.

• The stations have a wide supply voltage range of 220 ± 20%.
• The dimensions and weight of the stations are much smaller than analogues of other manufacturers. At the same time, the stations do not require forced ventilation and allow operation in severe climatic conditions.
• The stations contain a power factor corrector. The power factor is not less than 0.95.
• The efficiency of the stations is not less than 90%. Such high efficiency allows you to significantly save energy costs.

IP 00 execution stations. Unprotected modules from which stations are assembled.
-T1 D 1800-150-12AP
IP 20 execution stations. Only for indoor or outdoor use.
-T1 D 1800-150-12BP
IP 34 execution stations. Design for outdoor use of stations.
-T1 D 1800-150-12DP
-T1 D 3600-150-12DP
IP 54 execution stations. High-security stations, without ventilation slots.
T1 D 1800-150-12EP

• Stations of enhanced drainage protection. Technical specifications.